The electromagnetic flow meter ModMAG® M1000 has been designed to fit into the MAG meter series and especially for applications in machinery plants, vehicles and batching processes.
The applications range from DN 6 to DN 500 with the most various process connections like DIN flanges, dairy pipe connections, TriClamp®, etc.
The basic line of ModMAG® M1000 is provided with 24 VDC power supply, without display, with passive outputs and can be programmed via a serial port RS 232 or separate handheld. The device can also, upon request, be factory preconfigured and then just needs to be electrically connected on site.
DN 6 – DN 500
±0,3 % of actual flow,
±2 mm/s of actual flow
0,03 – 12 m/s
Min. 5 μS/cm (min. 20 μS/cm for demineralized water)
92 – 275 VAC (50/60 Hz) < 14 VA, optional 9 – 36 VDC, 4 W
LCD graphic display
2 x open collector, 1 x relay
0/4 – 20 mA, 0 – 10 mA
Modbus RTU RS232/RS485, ModBus®/TCP, M-Bus, HART®
Empty pipe detection
30.000 measuring values
Aluminium, IP 67
Max. 50 m
-20 °C up to +60 °C