EYC L051 Submersible Pressure Transmitter
Construction:
L051 submersible pressure transmitter is easy to apply in open container and rivers / Plunge the transmitter into the bottom of rivers and you can get level signal of lower limit and upper limit / Drinking water equipment / Pit sinking / Waste water plant / Big container and barrel / Flow current ( rivers and lakes )
Technicial Data:
Sensor type |
Piezoresistive diaphragm |
||||||||||||
Input type |
Level |
||||||||||||
Measuring range |
0 ... 10 bar |
||||||||||||
Cable overload range |
|
||||||||||||
Output |
4 … 20 mA |
||||||||||||
Signal connection |
2-wire |
||||||||||||
Linear accuracy |
±0.5% of F.S |
||||||||||||
Load resistance |
[Ohm] ≦(Operating voltage 10V)/ 0.02A-0.15Ω x cable length(M) |
||||||||||||
Output calibration(ZERO & SPAN) adjustment range |
±10% of Zero-point and full-scale |
||||||||||||
Response time |
≦5 ms |
||||||||||||
Measuring medium |
Liquid |
||||||||||||
Operating temperature |
0 ... 50°C |
||||||||||||
Operating humidity |
100%RH |
||||||||||||
Storage temperature |
-25 ... +60℃ |
||||||||||||
Zero-point error |
±0.2% F.S. / 10 K |
||||||||||||
Power supply |
DC 10 ... 30 V |
||||||||||||
Current consumption |
＜21 mA |
||||||||||||
Overvoltage protection |
≦DC 33 V |
||||||||||||
Electrical connection |
Specific cable |
||||||||||||
Installation |
Submersible |
||||||||||||
IP rating |
IP68 |
||||||||||||
Electrical protection |
■ Over-voltage |
||||||||||||
Housing |
SUS 316 |
||||||||||||
Wetted part |
SUS 316 |
||||||||||||
Cable |
PVC / PTFE |
||||||||||||
Weight |
350 g |
