Electric Heater Box

"Flying Horse" electric heater boxes are suitable for places without hot water supply. All electric heater boxes are pre-installed and wired at the factory.

Construction: 

• 0.8 or 1.0mm thick G.I. construction meet DW144 requirement
• Internal insulation
   - fiberglass 25mm thick, 32-48Kg/m3
   density or
   - Class 0 closed-cell elastomeric 25mm thick, 50Kg/m3
   density
• G.I. sheet for internal protection
• Black heat type heating element
   - finned tubular
• Manual reset over heat cut out
• Heater on/off contactor for 1-stage or multi-stage
• Special liners and insulation available
• J2 flange for air inlet and outlet
• Left hand or right hand external heater panel